Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KitchenAid KCDP 9050
Summary of Contents for KitchenAid KCDP 9050
- Page 1 Instructions for use...
-
Page 3: Table Of Contents
Warnings Safeguarding the environment Instructions for installation and use Extraction mode Installation Hood description Functioning Maintenance After-Sales Service... -
Page 4: Warnings
Warnings • This appliance should not be used by children or people with limited physical or mental abilities and with no experience or knowledge of its use, unless they are supervised by someone in charge of their safety or who has taught them how to use the appliance. •... -
Page 5: Safeguarding The Environment
Warnings Declaration of conformity This product has been designed, manufactured and marketed according to the following: - safety objectives of the “Low Voltage” Directive 2006/95/CE (wich replaces 73/23/CEE and subsequent amendments). - protection requirements of “EMC” Directive 89/336/EEC amended by Directive 93/68/EEC. Troubleshooting guide Hood does not work: •... -
Page 6: Instructions For Installation And Use
Instructions for installation and use This is an excessively heavy product and the movement and installation of the hood should be done by at least two or more people. Follow the instructions in this manual carefully. All responsibility is denied for problems, damage or fire to the appliance resulting in failure to comply with the instructions in this manual. -
Page 7: Installation
Installation The hood comes with plugs suitable for most • Furthermore, check that near the area where walls/ceilings. You should however consult a you are installing the hood (in an area accessible qualified technician to make sure the installation is even when the hood is fitted) there is an suitable for your kind of wall/ceiling. - Page 8 Installation Fig. 4 perforation layout making it coincide with the • Using a pencil, draw a line on the wall up to the sketched rectangle. Mark the two external holes ceiling that corresponds with the centre line; then drill the holes. Remove the perforation this will make installation easier.
- Page 9 Installation Fig. 6 • Connect the venting pipe (vent pipe and straps • Attach the chimney flue support bracket G to for fitting are not provided and must be the wall next to the ceiling, using the chimney purchased separately) for the exhaust fumes to support bracket as a template (the small slot the connection ring found above the motor created on the bracket must coincide with the...
-
Page 10: Hood Description
Hood description Fig. 8 1. Control panel 2. Grease filter 3. Handle for unhooking the grease filter 4. Halogen bulbs 5. Steam deflector screen 6. Telescopic chimney 7. Air outlet (only for use with vented mode version) 8. Perimetric suction panel Functioning Turn to maximum speed when there is a lot of steam in the kitchen. -
Page 11: Maintenance
Functioning Display: shows the extraction power selected and indicates when the grease filter needs changed (F) or the carbon filter (C) needs changing. It also shows the stand by function, the calibration function of the control panel (two flashing dots), the activation of the timer (a flashing dot on the right) and the remaining running time in minutes (number on the right). - Page 12 Maintenance Assembly: The panel should be hooked on the back by tightening the fasteners, while the front should be secured to the specifically placed bolts on the hood surface. Warning! Always check that the panel is fitted properly. Grease filter It should be cleaned by hand once a month (or when the system indicates that the filters are finished and need changing –...
-
Page 13: After-Sales Service
After-Sales Service Before calling Customer Care Centre: 1. See if you can solve the problem yourself with the help of the “Troubleshooting guide”. 2. Switch off the hood for a few minutes and re- start it to see if the problem has cleared itself. 3. - Page 16 Printed in Italy 09/08 5019 718 02037...