Club
Vario
1
3
4
2
4. Grasp the head end (6) and hold this with the motor
located to the bottom side.
5. Slide the tube of the head end (6) in the tube of the
transportset (7). Secure the head end (6) with the
starknobs (8).
9
11
10
1. Grasp the panels (1).
2. Mount the attachment of the transport set (2)
in the attachment of the panels (3) and lock
with the locking clamps (4). Mount the
transport set in the lowest position of the
panels.
3. Lock the brakes of the panels (5).
5
6. Grasp the foot end (9) and hold it sideways with the motor
located on the inside.
7. Place the foot end on the supports (10) of the transport
set and tighten with the star knob (11).
Installation manual
13
6
8
7
EN
Club
2023-05
Assembly
NL