Table of Contents
Advertisement
HOW TO INSTALL
安装方法
1. Fan body installation Method 1 install
with wooden joist.
1.机体的安装 方法一 使用木龙骨安装
1 Construct the wooden frame and attach it
horizontally to the wooden joist. (Fig.1)
在木龙骨上水平搭建木框(图1)。
The distance between the top of fan body and
ceiling should not be less than 20 mm. (Fig.2)
注意应保持机体顶部和天花板的距离不小于20 mm
(图2)。
2 Remove one hexagon screw that is fixed adaptor
assembly and fan body, then remove the adaptor
assembly. (Fig.3)
取下固定接头组合和机体的一颗螺丝，
按图示方法拆下接头组合 ( 图3)。
3 Fix the adaptor assembly on wooden frame with 2
self-tapping screws of Φ4.2x20. (Fig.4)
按图示将接头组合紧靠木框固定，
并用自攻螺丝φ4.2x20 ( 2颗)固定 ( 图4)。
IMPORTAN
重要
Adaptor assembly should not fix at an angle.
固定接头组合时要注意不能和木框之间有角度
8
Wooden joist
木龙骨
30 mm
Fan body
机体
Remove the
hexagon screw
去掉螺丝
Wooden frame
Self-tapping screw
Wooden frame
Φ4.2x20 (2 PCS)
木框
自攻螺丝 φ4.2x20 (2颗)
25~30 mm
□240±2
Wooden frame
木框
Ceiling
天花板
Adaptor assembly
木框
接头组合
Fig.1 / 图1
Fig.2 / 图2
Fig.3 / 图3
Fan body
机体
Adaptor
assembly
接头组合
Fig.4 / 图4
Advertisement
Table of Contents
