Advertisement
Step 1
You will need:
1 x Allen Key
8 x Large Bolts
(H6)
(H3)
Insert 4 x Mid Posts (P7) into 4 x Lower Posts (P8), then attach these to 2 x End Panels (P1) using 8 x Large Bolts (H3) to
connect, tightening with Allen Key (H6) to 70%, do not fully tighten yet. Note the direction of the holes for Lower post.
Step 2
You will need:
8 x Small Bolts
1 x Allen Key
(H1)
(H6)
Attach the Side Rails (P9 & P10) to the Lower Posts (P8) using 8 x Small Bolts (H1), tightening with Allen Key (H6) to 70%, do not
fully tighten yet. Note the location of the hole for Side Rail (P9) is facing outwards and is on the right, this is important for upcoming
ladder attachment.
(P7)
(H3)
(P1)
(H6)
(P8)
(P7)
(P8)
(H1)
(P7)
(P8)
(P8)
(H3)
(P7)
(H1)
(P8)
(P9)
(P7)
(P1)
(P8)
(P7)
(P10)
(P8)
(P1)
(P8)
(P7)
Advertisement
