Table of Contents
Advertisement
[(B-G)]
Adjusts the linear matrix. (Blue - Green)
The items that can be set are as follows.
f [−63]...[63]
[COLOR CORRECTION]
For details of setting, refer to "[COLOR CORRECTION]".
[SW]
[PARAM]
[REC SETTINGS] menu
Sets the various items in the recording function.
[CARDS/MEDIA]
[FORMAT MEDIA]
Formats the SD card in the specified slot. Data deleted as a result of formatting cannot be restored. Always confirm the data before formatting.
The items that can be selected are as follows.
f [SLOT1], [SLOT2]
[CLIP NAME]
[CAM INDEX]
Sets the CAM INDEX used in the name for the MOV format file to be recorded. Set one upper case alphabetical character. This is used as a value to be
stored in the volume label of the SD card.
The items that can be set are as follows.
f [A]...[Z]
(Factory setting: [A])
NOTE
@
t This will be stored in the volume label of the SD card, but will not be used in the file name when the [SYSTEM SETTINGS] menu → [SYSTEM MODE]
→ [MAIN CODEC] is set to AVCHD format.
[NEXT REEL COUNT]
Sets the REEL COUNT used in the name for the MOV format file to be recorded. The setting value of [NEXT REEL COUNT] is stored in the volume
label of the SD card as REEL COUNT together with the setting value of [CAM INDEX]. Also, the setting value will increase one after storing. (It will
return to [001] after [999])
f When the SD card is formatted
f When recorded to the SD card where REEL COUNT is not stored in the volume label
The items that can be set are as follows.
f [001]...[999]
(Factory setting: [001])
@
NOTE
t This will be stored in the volume label of the SD card, but will not be used in the file name when the [SYSTEM SETTINGS] menu → [SYSTEM MODE]
→ [MAIN CODEC] is set to AVCHD format.
[2 SLOTS FUNC.]
Sets the recording function using two SD cards.
[OFF]
[RELAY REC]
[SIMUL REC]
(Factory setting: [RELAY REC])
@
NOTE
t For the combination that can be set and restriction, refer to "Recording function that cannot be used simultaneously".
Chapter 4 Operation — Menu setting contents
Enables/disables the color correction function.
The items that can be set are as follows.
f [ON], [OFF]
This function sets color saturation and phase. It can be set to individual color hue.
The items that can be set are as follows.
f [−63]...[63]
Does not set.
Sets to relay recording.
Sets to simultaneous recording.
– 87 –
Advertisement
Table of Contents
