Table of Contents
Advertisement
r [VFR] display
When the [CAMERA SETTINGS] menu → [FPS] → [VFR SW] → [ON] is set, [VFR] is displayed at the top left of [FPS], and recorded with the frame rate
set in [FPS]. Audio cannot be recorded when [FREQUENCY] and [FPS] are different.
When the [CAMERA SETTINGS] menu → [FPS] → [VFR SW] → [OFF] is set, [VFR] is not displayed. Records in the 1x speed of the rate set in the
[SYSTEM SETTINGS] menu → [SYSTEM MODE] → [FREQUENCY].
[COLOR]
When [COLOR] is selected in the HOME screen, the COLOR screen is displayed allowing to set the color of the image (gamma and gamut).
[MAIN COLOR]: Sets the color of video recorded in the main recorder (entire camera system).
[SDI OUT]: Sets the output image from the <SDI OUT> terminal.
[HDMI OUT]: Sets the output image from the <HDMI> terminal.
[LCD OUT]: Sets the output image from the <LCD> terminal.
@
NOTE
t When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], [MAIN COLOR] is fixed to [V-Log].
t [SDI OUT]/[HDMI OUT]/[LCD OUT] settings
‑ When [MAIN COLOR] is set to [V-Log]
You can select [V-Log] or [V-709].
‑ When [MAIN COLOR] is set to [SCENE1] to [SCENE5]
Setting will be same as [MAIN COLOR].
‑ When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], [RAW] is displayed in [SDI OUT], and
it cannot be selected. [V-Log] and [V-709] can be selected in [HDMI OUT]/[LCD OUT].
[SHUTTER]
The SHUTTER screen is displayed when [SHUTTER] is selected in the HOME screen, allowing to set the shutter speed and enable/disable the shutter
function.
[VALUE]: The VIEW screen is displayed, and the shutter speed can be set.
f Select from the previously registered shutter speed setting values in [`]/[{].
f The shutter speed setting value can be added/deleted in the [CAMERA SETTINGS] menu → [SHUTTER] → [ADD deg]/[ADD sec]/[DELETE deg]/
[DELETE sec]. Maximum of 12 setting values can be registered.
[ON/OFF]: Enables/disables the shutter function.
NOTE
@
t When the [CAMERA SETTINGS] menu → [SHUTTER] → [SW] → [OFF] is set, [VALUE] in the SHUTTER screen cannot be selected.
Chapter 4 Operation — Operating each screen
– 66 –
Advertisement
Table of Contents
