Checking The Rubber Grip; Adjusting The Basic Position Of The Clutch Lever - KTM 150 EXC TPI 2021 Owner's Manual

12.39

Checking the rubber grip

12.40

Adjusting the basic position of the clutch lever

–
Mount the seat. (
–
Check the rubber grips on the handlebar for damage, wear,
and looseness.
Info
The rubber grips are vulcanized onto a sleeve on the
left and onto the handle tube of the throttle grip on the
right. The left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve or
the throttle tube.
401197-01
» If a rubber grip is damaged or worn:
–
Change the rubber grip.
–
Check that screw
Guideline
Screw, fixed
grip
A
Diamond
ure.
E00889-10
–
Adjust the basic position of the clutch lever to your hand size
by turning adjusting screw
Info
Turn the adjusting screw counterclockwise to decrease
the distance between the clutch lever and the handle-
bar.
Turn the adjusting screw clockwise to increase the
distance between the clutch lever and the handlebar.
The range of adjustment is limited.
S03609-11
Turn the adjusting screw by hand only, and do not
apply any force.
Do not make any adjustments while riding.
SERVICE WORK ON THE CHASSIS 12
p. 72)
1
is firmly seated.
M4 5 Nm (3.7 lbf ft)
must be positioned visibly as shown in the fig-
1
.
Loctite ® 243™
87