12 SERVICE WORK ON THE CHASSIS
12.31
80
E00881-11
S03486-10
Checking the chain for dirt
400678-01
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Lubricate the O-ring and join quick release coupling
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
–
Attach fuel tank breather hose
–
5
Plug in connector
for the fuel pump.
Finishing work
–
Mount the seat. (
p. 72)
–
Check the chain for heavy soiling.
»
If the chain is very dirty:
–
Clean the chain. (
2
with the collar bushings.
M6
10 Nm (7.4 lbf ft)
3
4
.
p. 81)
.