Remote Control - Projectiondesign F85 User Manual

4.2.2 Keypad

4.2.3 Remote control

15
Figure 4-5. Projector keypad
The projector has an illuminated keypad on the back of the unit. Figure 4-5 shows the
keypad.
The keypad is used to:
- navigate the menu system
- scroll the information in the LCD panel
- directly select input sources
- enter pin code (if enabled)
- power on/off
- adjust basic image functions
The keypad is illuminated for operation in dark environments. Available functions are
illuminated in yellow while selected (active) functions are illuminated in green. Functions that
are not available are not illuminated.
The remote control allows flexible access to the projector settings, either through direct keys,
or through the menu system. The remote control is backlit for use in dark environments.
It also has a data-jack that allows for wired connection to the projector. When the wire is
connected, the IR (infra-red) beam and internal batteries are switched off.
Figure 4-6. Remote control
Do not look into the laser beam when activated on the remote control. Laser light may
permanently damage eyesight. Avoid pointing the laser beam at people or animals.
Only use the supplied remote control, otherwise the result may be malfunction.
www.projectiondesign.com