Table of Contents
Advertisement
8 Maintenance
8.1 Software upgrades
45
In order to upgrade your projector, please follow the method described below.
•
You will need a USB stick set up with a FAT-file system to perform this upgrade
•
Access the upgrade software from the following web-address;
www.projectiondesign.com
•
Download and save the newest firmware.zip file to your PC desktop
•
Unzip and extract the firmware file to the root of a USB memory stick
•
Set the projector in standby mode
•
Insert the USB stick in the projector and wait for a few seconds
•
The LCD display will indicate that it has detected an upgrade file on the memory stick.
Wait a few seconds while the file is validated
•
Remove the memory stick when the LCD display instructs you to do so.
PS! Important that the USB is safely removed from computer, using the eject function on your PC.
•
Do not remove the power cord while the upgrade is still in progress
•
The projector may restart several times during the upgrade
The upgrade has finished successfully when the ordinary LCD display returns.
P l e a s e re fe r to o ur we bsi te a t pro j ec t i onde si gn.c o m to dow nl oa d t he re qui re d
fi l e s o r see k ot her i nf o r m at i on
www.projectiondesign.com
Advertisement
Table of Contents
