Control Interface - IBC SL 20-160 G3 Installation And Operating Instructions Manual

SL 10-85 G3, SL 14-115 G3, SL 20-160 G3, SL 30-199 G3 MODULATING GAS BOILERS
Operational and historical data may be accessed at any time using the System Status
and Load Profiles sections of the control. Error logs are available in the Diagnostics
section and the controller is capable of recording any or all errors since original power-up
complete with the date and time of the error.

2.3 CONTROL INTERFACE

The control interface is provided through a 2-1/4 x 4 inch, color touchscreen display. The
touchscreen responds to a light finger touch on the screen. You can also use a stylus or
similar device to operate the touch controls. Do not use a sharp or metallic object such as
a screw driver to operate the control as it could damage the touch screen.
The controller display is divided into two areas, the screen active area and the boiler
status bar. All screens have an active area consisting of the screen title bar at the top and
a border surrounding the active area. At the bottom of the display there is space reserved
for the boiler status bar.
Prior to any interaction with the touch screen, the display shows the Home screen with
details of the current boiler status. If the controller has been left on the Home screen
long enough (user adjustable, 10 minutes by default) the display with be dimmed to save
power.
The control will automatically return to the home screen if left unattended. The screens will
step back one screen at a time in 10 minute increments if the touch screen has not been
touched. The pop-up windows will also step back automatically in 2 minute intervals.
The boiler status bar indicates if the boiler is in a normal, warning or alarm state. When
no warning or alarm state is present, the bar will be green and the time will be displayed
inside the green area. The bar can also be yellow or red corresponding a warning or alarm
state. Text inside the bar will indicate the specific warning or alarm present. If more than
one alarm is present the text display will slowly change, rotating though whatever alarms
that are present.
2-2
INSTALLATION AND OPERATION INSTRUCTIONS