Subscribe to Our Youtube Channel
Related Manuals for Cyber Power OL6000RT3U
Summary of Contents for Cyber Power OL6000RT3U
- Page 1 User’s Manual OL6000RT3U OL8000RT3U OL10000RT3U Cyber Power Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Phone: 877-297-6937 Fax: 952-403-0009 www.cyberpower.com K01-0000608-00...
-
Page 2: Important Safety Instructions
FOR PERMANENTLY CONNECTED EQUIPMENT, A READILY CAUTION! Do not use an improper size power cord as it may cause ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED IN damage to your equipment and cause fire hazards. THE BUILDING INSTALLATION WIRING. Copyright © 2017 Cyber Power Systems, Inc. - Page 3 Screw hole dust covers (14) * 2 sets USB communication cable Power cord * PowerPanel® Business Edition software is available Serial Interface Cable (RS-232) on our website. Please visit www.cpsww.com and go to the Software Section for FREE download. Copyright © 2017 Cyber Power Systems, Inc.
-
Page 4: Hardware Installation
Tighten the front rail screws on the rack. Step 2: Rackmount ears & hanging brackets installation Attach two rackmount ears to the UPS using the provided M5X7L*8pcs screws and tighten two hanging brackets with the M5X6L*6pcs screws. Copyright © 2017 Cyber Power Systems, Inc. - Page 5 Slide the hanging brackets on the UPS into the rails mounted in the rack with the front of the unit facing toward you. Secure the UPS to your rack with four M5X12L*4pcs screws at the front of the rack. (Located in position 5 & position 7) Copyright © 2017 Cyber Power Systems, Inc.
-
Page 6: Vertical/Tower Installation
CAUTION! Do not work alone under hazardous conditions. CAUTION! In case of the risk of electric shock, do not remove the top cover. CAUTION! The battery can energize hazardous live parts inside even when the AC input power is disconnected. Copyright © 2017 Cyber Power Systems, Inc. -
Page 7: Installing Your Ups System
(refer to the technical specifications). support. This UPS is equipped with an auto-charge feature. When the UPS is plugged into an AC outlet, the battery will automatically charge, even when the unit is switched off. Copyright © 2017 Cyber Power Systems, Inc. -
Page 8: Hardwiring The Input/ Output Terminals
Step 2: Fix the bottom cover on the terminal block Loosen the two screws to separate the top and bottom covers. Tighten the two screws to fix the bottom cover on the terminal block. Copyright © 2017 Cyber Power Systems, Inc. - Page 9 Connect the three wires to the output terminal block. Connect the three wires to the input terminal block. Step 5: Fix the top cover on the bottom cover Tighten the six screws to fix the top cover on the bottom cover. Copyright © 2017 Cyber Power Systems, Inc.
-
Page 10: Backfeed Protection
3. Hardwire the input terminals and “Backfeed Protection Connector” as shown in the following diagram. 4. The external isolation device must be installed in the Mains path. Mains L1 L2 PE IP-L1 IP-L2 PSDR 2A Fuse Backfeed (Slow Blow) AC-L1 AC-L2 Copyright © 2017 Cyber Power Systems, Inc. -
Page 11: Basic Operation
12. Relay Output Connector Prevents power feedback from the inverter to utility power in case of power failure and a Convert UPS signals into real potential-free Dry Contacts fault in the bypass circuit. for industrial control. Copyright © 2017 Cyber Power Systems, Inc. - Page 12 Step 5: Use a power cord to plug AC input inlet of the battery module into a wall receptacle. Step 6: Turn on the DC breaker of the EBM. Copyright © 2017 Cyber Power Systems, Inc.
- Page 13 EBM Number setting, select the appropriate number and Save. This operation can also be done if there is an RMCARD installed in the UPS, or via PowerPanel® Business Edition Agent. Please see their respective User Manuals for instructions. Copyright © 2017 Cyber Power Systems, Inc.
-
Page 14: Led Indicators - Ups Status
Press this button to scroll up in the LCD menu. ▼ Press this button to scroll down in the LCD menu. ENTER Press this button to select an option. Press this button to cancel or return to previous LCD menu. Copyright © 2017 Cyber Power Systems, Inc. -
Page 15: Lcd Setup Functions
Displays the present Date & Time - - - - / - - / - - - -:- - Next BAT Change Displays the next Battery Change Date & Time XXX / XXXX Copyright © 2017 Cyber Power Systems, Inc. -
Page 16: Lcd Event Log
You may be prompted to save the selection, if so press the “ENTER” button to save the setting. Some options are saved and started automatically. (See the following table for additional details.) Press the “ESC” button to cancel or return to the previous LCD menu. Copyright © 2017 Cyber Power Systems, Inc. -
Page 17: Silencing Audible Alarms
[Disable] [Enable] Disable 200V are derated by 20%, 208 V are derated by 10% for OL6000RT3U This function can’t be set when Manual Bypass, Generator Mode or Converter Mode is enabled. UPS has no bypass when Generator Mode is enabled. -
Page 18: Lcd Module Remote Control And Wall-Mounting Instructions
Step 4: Mount LCD Module on the Wall SAFETY PRECAUTIONS CAUTION! To be performed by qualified personnel only. CAUTION! To avoid electric shock, turn off and unplug the unit before installing REMOTE CONTROL or WALL-MOUNTING INSTRUCTIONS. Copyright © 2017 Cyber Power Systems, Inc. -
Page 19: Maintenance
ReplaceBAT to reset the battery replacement date. This operation can also be done via PowerPanel® Business Edition Agent or RMCARD web interface if it is installed. Please see their respective User Manuals for detailed instructions. Copyright © 2017 Cyber Power Systems, Inc. -
Page 20: Technical Specifications
L x W x H = 26 x 17 x 5.2in. (66 x 43.3 x 13.2cm) Net Weight--Power Module 53lbs(24Kg) Net Weight--Battery Module 167.2lbs(76Kg) 171.6lbs(78Kg) Safety Conformance Approvals CE, UL1778, FCC part 15 Class A *)200V are derated by 20%, 208 V are derated by 10% for OL6000RT3U Copyright © 2017 Cyber Power Systems, Inc. -
Page 21: Troubleshooting
Internal DC bus voltage is too high or too low. Cyber Power Systems, Inc. www.cyberpower.com © Entire contents copyright 2017 Cyber Power Systems, Inc., All rights reserved. Reproduction in whole or in ® ® part without permission is prohibited. PowerPanel Business Edition and PowerPanel Personal Edition are trademarks of Cyber Power Systems, Inc. -
Page 22: Product Registration
How Do You Open A Connected Equipment Claim? 1. Call us at (877) 297-6937 or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379, or send us an e-mail message at claims@cpsww.com for instructions, within 10 days of the occurrence. - Page 23 For further information please feel free to contact CyberPower at CyberPower Systems (USA), Inc. 4241 12th Ave E., STE 400, Shakopee, MN 55379; call us at (877) 297-6937; or send us an e-mail message at claims@cyberpowersystems.com. Copyright © 2017 Cyber Power Systems, Inc.
-
Page 24: Conformance Approvals
Address: 4241 12th Avenue E, Suite 400 Shakopee, MN 55379, USA Hours of Operation: Monday – Friday, 7:00am – 6:00pm (CST) Entire contents copyright © 2017 Cyber Power Systems, Inc. All rights reserved. Reproduction in whole or in part without permission is prohibited. Copyright © 2017 Cyber Power Systems, Inc.
Need help?
Do you have a question about the OL6000RT3U and is the answer not in the manual?
Questions and answers