Table of Contents
Advertisement
*3
Character size
Standard/Double height/
Double width/Double
height and width
*1: Installed character codes vary by printer model.
*2: Only the character sets installed on the printer can be printed.
*3: Space between characters is not included. Characters can be scaled up to 64 times as large as the standard size.
By specifying UTF-8 character encoding, all the installed character sets can be printed.
For more details on printing Unicode characters, see "FS ( C" of the ESC/POS command reference, or
manual of the software you use.
Barcode/
two-dimensional symbol printing
Auto Cutter
Type
Cutting method
• When taking off the cut paper, the paper is pulled at the cut position and it may cause line spacing
of the next print to partially narrow.
• To prevent the uneven line spacing, when printing after paper cutting, it is recommended to
advance the paper by approximately 1 mm {16/406 inch} immediately before printing.
• If the paper is short in vertical length, advance the paper at least 35 mm {1.38 inch}.
Paper Detector
Roll paper end detector
Standard mode
ANK Font A
ANK Font B
Special Font A
Special Font B
Kanji Font A
Kanji Font B
42 characters mode
Special Font A
(only when using
Special Font B
80 mm width paper)
Kanji Font A
("Application Development Information" on page
UPC-A, UPC-E, JAN8 / EAN8, JAN13 / EAN13, Code39, Code93, Code128, Code128
auto, ITF, CODABAR(NW- 7), GS1-128, GS1 DataBar, PDF417, QR code, Maxi Code,
Data Matrix, Aztec Code, Two-dimensional GS1 DataBar, Composite Symbology
Detachable V-shaped blade cutter
Partial cut (cutting with one point in center left uncut)
Detects the presence or absence of paper in the paper path. When roll paper end is
detected, printing is stopped. Printing is resumed when a roll paper is set and the roll
paper cover is closed.
1.50 x 3.00 mm
1.13 x 2.13 mm
1.50 x 3.00 mm
1.13 x 3.00 mm
3.00 x 3.00 mm
Japanese: 2.50 x 3.00
Korean: 2.00 x 2.00
1.63 x 3.00 mm
1.25 x 2.13 mm
3.25 x 3.00 mm
111)
Appendix
121
Advertisement
Table of Contents
