Cleaning The Auto Cutter - Epson CW-C4000 Series User Manual

CW-C4000 Series User's Guide

Cleaning the Auto Cutter

The fixed blade of the auto cutter may become unable to cut cleanly due to the adhesive of label paper adhering to
it.
Perform cleaning by following the steps below.
A
Turn the printer off and then disconnect the power cable from the outlet.
B
Open the front cover and remove the paper.
C
Remove the adhesive adhered to the fixed blade of the auto cutter on the front cover side.
Remove it with a cotton swab or the like dampened with alcohol.
Do not directly touch the fixed blade of the auto cutter.
! Caution
Doing so may cause injury to a finger.
Maintenance
58