Epson C31CJ52121 Technical Reference Manual page 89

Serial Interface Settings (Serial model only)
Baud rate
• 115200 bps (initial setting)
• 2400 bps
• 4800 bps
• 9600 bps
• 19200 bps
• 38400 bps
• 57600 bps
Parity
• None (initial setting)
• Odd parity
• Even parity
Handshake
• DTR/DSR control (initial setting)
• XON/XOFF control
Bit length
• 8-bit wide (initial setting)
• 7-bit wide
Receipt Enhancement
Functions
Automatic top logo printing
Automatic bottom logo printing
Advanced settings for automatic top/
bottom logo printing
Available settings
Key code
Justification (Left justified, Centered, Right justified)
Number of deleted lines after top logo printing
Key code
Justification (Left justified, Centered, Right justified)
Print top logo when paper is fed to the cut position
(Enabled/Disabled)
Print top logo at power-on (Enabled/Disabled)
Print top logo when the roll paper cover is closed (Enabled/
Disabled)
Print top logo when the buffer is cleared during a recover-
able error.(Enabled/Disabled)
Print top logo when advancing paper using the Feed but-
ton is finished (Enabled/Disabled)
Chapter 4 Advanced Usage
Initial setting
Undefined
Undefined
Undefined
Undefined
Undefined
Enabled
Disabled
Enabled
Enabled
Disabled
89