Climer ECOHEAT EH500 Installation And User Manual page 20

9.10. PHOTOVOLTAIC INPUT
Working on this mode, the system automatically heats the water due to electric energy
surplus or by Off Peak rate.
The parameters of this mode can only be changed by the Installer's Menu.
Contact with the technician for more information.
The system can be combined with and Photovoltaic Inverter to take advantage of the surplus
energy generated by the panels, by forcing the system working and storing this energy in
useful hot water.
The system has in the electric boar two terminals to connect a zero-voltage contact.
When the contact is closed, the system automatically changes to Photovoltaic mode and the
heat pump and electric heater work to achieve the programmed temperature. When the
contact is opened, the system returns to the previous mode.
This contact can be also used for Off Peak Rates. To do it, connect into the contact a timer
with a zero-voltage output.
9.11. Displaying/deleting compressor functioning hours
Delete compressor functioning
hours
17
1 click
Display compressor functioning hours
1 click
INSTALLATION AND USER MANUAL
Touch the UP or
DOWN key to set
"149"
ECOHEAT
V2REV2EN0822