Climer ECOHEAT EH500 Installation And User Manual page 18

9.9. OVERBOOST Mode
Select this mode to achieve a fast heating by using simultaneously heat pump and electric
heater.
This mode Works as a rapid heating. Once the setpoint temperature is reached, the system
returns to the initial mode.
- If Overboost mode is switched on when the system Works from ECO mode: The
system heats the water up to SP1, and then returns to ECO again
- If Overboost mode is switched on when the system Works from Auto mode: The
system heats the water up to SP2, and then returns to Auto again
When Overboost mode is active, the display automatically changes showing the water
temperature and Obs.
Cancelling the Overboost Mode
15
Touch
2 sec
the screen
Touch
2 sec
blink faster
Touch
the initial mode.
INSTALLATION AND USER MANUAL
for 2 seconds, Obs will blink on
for 2 seconds again, Obs will
and the mode will be changed for
ECOHEAT
V2REV2EN0822