Climer ECOHEAT EH500 Installation And User Manual page 16

9.7. ECO Mode
ECO mode: Maximum savings. The system heats water only by heat pump technology.
This is the factory default mode.
Setting the ECO temperature setpoint
The water temperature set point in ECO mode can be changed with the SP1 parameter.
13
Touch
1 click
The display will show the programmed
temperature.
1 click
Touch
temperature.
Touch
1 click
INSTALLATION AND USER MANUAL
key and select SP1. Touch
to confirm.
or to select the desired
to confirm or
ECOHEAT
to cancel.
V2REV2EN0822