Climer ECOHEAT EH500 Installation And User Manual page 13

9.2. INSTALLATION- Switching on
After full installation of the water heater (power and water pipes connected) and after the
water heater tank is full of water, power can be turn ON.
9.3. Switching OFF
4 sec
10
4 sec
INSTALLATION AND USER MANUAL
1. After filling the tank of water, connect
the mains plug to the mains supply. The
screen will show the
2. Hold the key during 4 seconds.
The display will show the icons.
3. The screen will show the water
temperature.
To switch off the system, hold the
key for 4 seconds.
ECOHEAT
symbol.
V2REV2EN0822