New World NWWM814W User Manual page 24

How to use the appliance
Pause a running program and open the door, if
needed
Press START/PAUSE
program.
Provided water level or temperature is not too high,
the DOOR LOCK
can open the door, for example to add more laundry,
or to remove laundry which was loaded by mistake.
Press START/PAUSE
with the program.
9. Cancelling a running program, if needed
· Turn the wash cycle selector knob to OFF
position until the washer stops.
· If the water level and temperature are low
enough, the door unlocks may be opened.
· The door remains locked if there is water in the
drum. To unlock the door, switch the washer on,
select the Spin program and turn the spin option
off by pressing the SPEED button to set the spin
cycle is turned off (all spinning speed value
indicator light go out on the display).
· Press START/PAUSE
program. The water is emptied and the door
unlocks at the end of the program.
10. Switch off the washer after program End
· At the end of the cycle, the message "End" is
shown on the display.
· The door can only be opened when the symbol
DOOR LOCK indicator turns off.
· Check that the DOOR LOCK
then open the door and take out the laundry.
· Turn the wash cycle selector knob to OFF
position to switch the washer off.
Leave the door ajar to let the interior of the washer
to dry.
button to pause a running
indicator light turns off. You
button again to proceed
button to running Spin
indicator is off,
23