Table of Contents
Advertisement
Various cycles and functions
Various functions
Delay end
Press DELAY END button to set the program end
(Delay end) time in one hour increments to a
maximum of 24 h (hours). After selecting the
desired washing program but before pressing the
START/PAUSE
button, press the DELAY END
button until the desired time is displayed, e.g. 8h.
NOTICE: The cycle duration is included in the set
Delay End time.
Here is an example of a 1hr: 30 min cycle time and
an 8 h Delay end time.
8 h is displayed and count down (approximately 6 h:
30 min) until the washing cycle begins (at 1hr: 30
min) then the cycle duration 1: 30 is displayed and
began. Total time approximately 8 hours.
The way to cancel Delay End function:
· Turn the wash cycle selector knob to reset the
wash cycle.
NOTICE:
⚫ Delay End function cannot be set some wash
cycle.
⚫ The end time of the wash cycle may be different
from the actual reservation time depending on
the water supply pressure, drainage, clothing
type, water temperature and other conditions.
Child lock
1. Setting the Child lock function can avoid
children's mis-operation and external interference
to the washing procedure.
2. During operation, long press the SPEED
for 3 seconds to set or cancel the Child lock
function.
3. After the Child lock function is set, the indicator
light
is illuminated, the door cannot be opened,
the control panel is locked and all buttons on
control panel do not respond. You can turn off the
machine by turn the wash cycle selector knob.
4. After the child lock function is set. When the
machine is turned on again, the machine directly
run the program before turning off the machine.
Cancelling the buzzer
Press and hold the SPEED
TOUCH
at least 3 seconds, you can turn off the buzzer that
sounds during the washing cycle running.
⚫ To activate the buzzer setting
Do the same operation as you did for cancelling. The
buzzer setting is activated after one beep.
Add clothes during the program is running
When the program is running, long press the
START/PAUSE
open the door and add clothes. After the operation
is completed, close the door, long press the
START/PAUSE
continues to run.
NOTICE:
If the water level or water temperature in the drum
is too high, the door lock indicator light
illuminated, the door cannot be opened and the
midway clothes filling function cannot be used.
Steam
A cycle designed for cotton clothes that are not easy
to fade.
button
⚫ Steam treatment can reduce the wrinkle of
clothes, make the clothes reach the ideal
humidity level, reach the most relaxed state, and
make ironing easier.
⚫ Steam treatment can get rid of the peculiar smell
on clothes
20
button and ONE
button together at the same time for
button to pause the machine,
button again, and the machine
is
Advertisement
Table of Contents
