Table of Contents
Advertisement
Description of the appliance
M---Display
The display is useful when programming the machine and provides a great deal of information.
1---Temperature indicator
When
a program
temperature value of this program will appears on
the display, with the corresponding temperature
indicator light illuminated.
You can change the temperature value by pressing
the TEMP.
button. When a temperature value is
selected, the corresponding temperature value
indicator light illuminated on the display. If all
temperature value indicator light are off, it indicated
the washer using only cold water without utilized
the washer's heater in this program.
2---SPINNING SPEED indicator
When a program is selected, the default spinning
speed value of this program will appears on the
display, with the corresponding spinning speed
indicator light illuminated.
You can change the spinning speed value by
pressing the SPEED button. When a spinning speed
value is selected, the corresponding spinning speed
value indicator light illuminated on the display. If all
spinning speed indicator light are off, it indicate the
washer does not spin after the final drain process in
this program.
3---DOOR LOCK indicator
The lit symbol indicates that the door is
locked. To prevent any damage, wait
until the symbol turns off before opening the door.
To open the door while a cycle is in progress, press
the START/PAUSE
symbol is switched off the door may be opened.
4---CHILD LOCK indicator
The lit symbol indicates the CHILD LOCK
function is activated, the control panel is
locked (apart from the OFF position on the control
panel).
is
selected,
the
default
button, if the DOOR LOCK
5---DELAY END indicator
The lit symbol indicates the DELAY END
function is activated. The countdown to
the end of the selected wash cycle will appear on
the digital display.
6---ONE TOUCH indicator
The lit symbol indicates the One Touch
wash program is selected. There are three
ways to set the One Touch wash program.
7---RINSE COUNT indicator
When the symbol lit, you can select the
rinse count, the selected rinse count will appear on
the digital display.
8---DIGITAL DISPLAY
1)
Wash cycle remaining
time
2)
Delay end time
3)
DIY time
4)
Rinse count
5)
Fault code
13
Advertisement
Table of Contents
