Weber mt CR 5-II CCD Operating And Maintenance Manual page 20

Compacting
Switching off the engine
Manual start
E-start
20
CAUTION
There is a crushing hazard between the machine and the
wall during work in close proximity to walls.
Use extra caution when working close to obstacles
CAUTION
Risk of injury if the machine is guided improperly.
Guide the machine safely with both hands on the handle.
ATTENTION
Danger of material damage or excessive wear if V-belt slips
through.
Operate the machine only in full-throttle mode.
Start the engine.
Bring the gas lever into the full-throttle position.
Switch between forward and reverse travel by setting the
handle to the corresponding direction.
The forward and reverse travel of the machine is
infinitely variable.
The speed of the machine is selected with the corre-
sponding deflection of the handle
Bring the gas lever into the idle speed position.
Press the switch-off button (3).
On machines equipped with an electric starter, turn the
ignition key to position "0" and pull out the ignition key.
Bring the gas lever into the idle speed position.
Turn the ignition key to the position "0" and pull out
the ignition key.