Page 2
Table 1. Correct stand plates according to loudspeaker model Figure 2. Thread on leg A Figure 1. Exploded view of the 8000-450. Notice that there is one leg with a groove for cables (B) and two legs with no groove (A) Figure 3.
Page 3
Figure 6. Leg B is bolted to the triangular brackets from the Figure 4. Next attach the second leg A outside Figure 5. Legs A correctly attached Figure 7. Attaching the stand plate...
Page 4
Figure 8. Attaching the cables to a magnetic holder Figure 10. Installation complete Figure 9. Magnetic holders keep the cabling tidy www.genelec.com Genelec Document D80000-450. Copyright Genelec Oy 8.2021. All data subject to change without prior notice International enquiries: In the U.S. please contact: In China please contact:...