Table of Contents
Advertisement
EN
Coating Materials Suitable for Use
Low-viscosity coating substances:
Low-viscosity coating substances:
Water- and solvent-based paints, finishes,
primers, 2-component paints, clear
finishes, automotive finishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Interior wall paint (dispersions and latex
paint)
All coating materials with the green
Perfect Spray logo
Materials that contain highly abrasive components, plaster, facade paint, caustic solutions
and acidic coating substances. Flammable materials.
7. Preparation of the workplace (for interior wall paint)
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket! Mask all the areas
and objects that are not to be spray painted, or remove them from the
work area. No liability is assumed for damage due to overspray. Silicate
paint corrodes glass and ceramic surfaces upon contact! All such surfaces
must therefore be completely covered.
Pay attention to the quality of the adhesive tape used.
i
Do not use excessively strong adhesive tape on wallpaper and painted
surfaces, in order to avoid damaging these surfaces when removing the
tape. Remove adhesive tape slowly and evenly; do not use jerky movements.
Do not leave adhesive tape on surfaces any longer than necessary, in order
to minimise the possibility of residues when removing.
Also observe the adhesive tape manufacturer's instructions.
8. Charging
Before connecting to the mains, make sure that the mains voltage corresponds to the
specification on the charger's rating plate.
1.
Plug the mains plug of the charger into the socket (the battery charging indicator
(9) lights up constantly).
16
Coating Materials Not Suitable for Use
W 600 Flexio 18V
Spray attachment
Standard
Wall Extra I-Spray
Level
to
to
Advertisement
Table of Contents
