Table of Contents
Advertisement
10.
To remove the display panel assembly:
a.
Remove the display assembly.
b.
Remove the display bezel.
c.
The display panel assembly is secured to the display back cover with tape that is installed
under the bottom corners (1) of the display panel assembly. To remove the panel, use tweezers
to grasp the end of the tape. While turning the tweezers, wrap the tape around the tweezers (2)
as you continue to pull the tape out (3) from behind the display panel. You must pull the tape
multiple times before it is completely removed.
d.
Swing the top edge of the display back cover (1) up and away from the display panel assembly.
e.
Release the adhesive support strip (2) that secures the display panel connector to the display
panel assembly.
f.
Release the support bar (3) that secures the display panel connector to the display panel
assembly.
54
Chapter 5 Removal and replacement procedures for authorized service provider parts
- Quick Links:
- Locating Hardware
- Solid-State Drive
Hide quick links:
Advertisement
Table of Contents
