Table of Contents
Advertisement
Table 5-1
Bottom cover description and part number
Description
Bottom cover (includes rubber feet)
Before removing the bottom cover, prepare the computer for disassembly (see
disassembly on page
40).
Remove the bottom cover:
1.
Position the computer upside down with the front toward you.
2.
Slide the screw cover (1) to the left, and then rotate the screw cover clockwise (2) until the screw is
accessible.
3.
Loosen the five Torx5 captive screws (3) that secure the bottom cover to the computer.
4.
Use a nonmarking, nonconductive tool (1) to separate the rear edge of the bottom cover (2) from the
computer.
Spare part number
N51006-001
Preparation for
Bottom cover
41
- Quick Links:
- Locating Hardware
- Solid-State Drive
Hide quick links:
Advertisement
Table of Contents
