KEYS DESCRIPTION
Keys to use:
DURING PROGRAMMING or to INSERT PASSWORD
To modify parameters during programming, you need to select the parameter through arrows
(characters of the selected field are in Reverse), press Enter key
at the end press enter
PAGE - 14
NOTIFIER ITALIA
ARROWS: used for selections.
ENTER: after making a selection, confirms data
ESCAPE: "back", erases the last introduced data or gets out of the menu
FUNCTION KEYS: these keys activate the corresponding displayed function. These
keys change in function of the selected menu.
Example: in the "plant status" screen, these keys allow to access to Programming,
Zone 1 Display, and Zone 2 display menus.
again to confirm.
Installation and operating manual
Doc. M-205.1-UDS3N-ENG Rev A.1
and use arrows to modify the field;
UDS-3
UDS-3_manu