Performing An Ir Hotsync ® Operation; Changing The Plugin Screen - Samsung SPH-I500 Online User's Manual

your cradle again until you reconfigure the HotSync Manager to
communicate with the port defined for cradle synchronization.
Performing an IR HotSync
After you complete the steps to prepare for performing an IR HotSync
operation, it is easy to perform the actual operation.
To perform an IR HotSync operation:
Tap the Applications Launcher icon
1.
Tap the HotSync icon
2.
Tap
3. Local
Tap the drop down menu below the HotSync icon and select
4.
PC/Handheld
Position the IR port of your handheld within a couple of inches of
5.
the infrared port of your computer.
Tap the
6. HotSync
Returning to cradle HotSync operations
If needed, connect the cradle to a serial (COM) port of your
1.
computer.
Click the HotSync Manager icon in the Windows system tray.
2.
Choose
3. Setup
Select the COM port where your cradle is connected.
4.
Click .
5. OK

Changing the Plugin Screen

The i500 installation CD comes with additional images that can be used
to replace the analog clock image. Since the analog clock is stored in
your phones memory, it can be re-installed by deleting the new image.
To change the image:
On your desktop/laptop, click
1.
Install Tool
Click the
2. Add
Navigate to
3.
.
.
.
icon to start the IR HotSync operation.
, and then click
.
button.
c:\program files\samsung\sph-i500
Section 2: Understanding Your Phone
®
operation
.
.
Local
TM
Start/Palm Desktop
2Q: Advanced HotSync 158
IR to a
and select the
.