Samsung SPH-I500 Online User's Manual page 105

Note:
The Auto-off after setting is also used to determine when the display
will shut off during phone calls.
Auto-off after:
LCD backlight remains ON when there is no activity. Setting this
preference to a lower value conserves battery power. The available
settings are 30 seconds, 1 minute, 2 minutes, or 3 minutes.
System Sound:
settings are OFF, Low, Medium, or High.
Alarm Sound:
configured on the handheld computer. The available settings are
OFF, Low, Medium, or High.
Alarm Vibrate:
default setting is Off.
Alarm LED:
The default setting is On.
Game Sound:
handheld computer. The available settings are OFF, Low, Medium, or
High.
Beam Receive:
accept information from another IR device through the use of
beaming. An infrared beam is sent between the two devices and
information is exchanged. This option must be set to
correctly.
- This determines the amount of time the handheld
- This is the sound level of the system. The available
- This is the sound level for alarms that are
This enables the vibrator for the alarm function. The
This enables the LED to flash for the alarm function.
- This is the sound level for games installed on the
- This option allows the handheld computer to
Section 2: Understanding Your Phone
2J: Getting to Know the Handheld Computer 102
to work
ON