Displaying Your Phone Number - Samsung SPH-I500 Online User's Manual

Connecting the Desktop Holder to a Desktop Computer
Once the software has been installed and your computer is
1.
completely rebooted, plug in the desktop holder's A/C plug to a
standard wall outlet.
Place the i500 into the desktop holder. A light should be displayed on
2.
the front of the holder to indicate that the battery is charging.
Note:
There should also be a lightning bolt icon displayed across the
battery icon on the phone to indicate that the battery is charging.
Connect the USB cable from the desktop holder to an available port
3.
on your PC. A series of driver messages are displayed on screen.
Press the HotSync button on the holder to initiate the first HotSync
4.
operation.
Note:
Performing a HotSync operation by pressing the button on the
Desktop Holder requires power from the Travel Charger. The Travel
Charger plugs into the side Desktop Holder. Make sure that the Travel
Charger is plugged into a wall outlet and then connected to the Desktop
Holder. A HotSync operation can still be performed from the device using
the HotSync screen. For more information on performing a HotSync from
the device, see page 197.

Displaying Your Phone Number

Just in case you forget your phone number, your PCS Phone can
remind you.
To display your phone number:
From the phone idle screen, tap
1.
Tap
2. Options
Tap
3. Display
Tap
4. Screen
Select the drop down arrow next to greeting and select
5.
.
Number
and select
Preferences.
.
.
Section 2: Understanding Your Phone
for
Main Menu
2A: Your PCS Phone - The Basics
.
My Phone
29