Performing Activesync Using Ir - Samsung SPH-i700 Series User Manual

5. Select or deselect the desired applications that you want
to synchronize and click
Finish
6. Click
The i700 and the PC should perform the first
ActiveSync. This may take some time, depending on
the amount of information that needs to be
synchronized. When the process is complete,
disconnect the data cable from the i700 and close
ActiveSync.

Performing ActiveSync using IR

If you do not have your data cable and you need to
perform a ActiveSync operation, you can use the IR
port. To use the IR port to perform an ActiveSync:
1. On the PC, launch the ActiveSync application.
File
2. Click
3. Click the check box next to
infrared connection to this COM port
4. Click the drop down arrow and select
OK
5. Click
6. On the i700, tap
the screen.
ActiveSync
7. Tap
8. Tap Tools and select
9. Aim the two devices at each other.
Chapter 14 - ActiveSync
112
.
Connection Settings
and select
to close the window.
Start
.
Connect via IR
Next
.
Allow serial cable or
located in the upper left corner of
.
.
Infrared Port (IR)
.
.