Samsung SPH-I500 Online User's Manual page 149

Tap the Menu Launcher icon
2.
Tap
3. Record
The Beam command for a single record.
In the Address Book, Beam Business Card, Beam Category.
When the Beam Status dialog box is displayed, point the IR port
4.
directly at the IR port of the other device.
Note:
For best results, your phone should be approximately four and 40
inches apart.
Wait for the Beam Status dialog box to indicate that the transfer is
5.
complete.
To Beam an Application
Tap the Applications Launcher
1.
Tap the Menu Launcher
2.
Select
3. Apps
Tap the Application to send.
4.
Note:
Some applications are copyright protected and cannot be beamed
to another device. These applications are indicated with a lock icon.
Tap
5. Beam
When the Beam Status dialog box is displayed, point the IR port
6.
directly at the IR port of the other device.
Wait for the Beam Status dialog box to indicate that the transfer is
7.
complete.
Receiving Beamed Information
Before you can receive beamed information, the beam receive function
must be ON.
To make sure the beam setting is ON:
Tap the Applications Launcher
1.
Tap the Preferences icon
2.
Tap the drop down menu and select
3.
. Select one of the following:
and tap
Beam
.
Section 2: Understanding Your Phone
2P: Managing Handheld Computer Software 146
.
.
.
.
.
.
General
.