Trial Operation; Ftxr Series - Daikin RX-W Series Service Manual

Hide thumbs Also See for RX-W Series:
Table of Contents

Advertisement

Trial Operation

3. Trial Operation

3.1

FTXR Series

Outline
Trial operation should be carried out in either cooling or heating operation.
1. Measure the supply voltage and make sure that it is within the specified range.
2. In cooling operation, select the lowest programmable temperature;
3. Carry out the trial operation following the instructions in the operation manual to ensure that all
4. After trial operation is complete, set the temperature to a normal level (78°F to 82°F (26°C to
When operating the air conditioner in cooling operation in winter, or heating operation in summer,
set it to the trial operation mode using the following method.
Procedure
ARC466 Series
1. Press the center of Temp button and Mode button at the same time.
2. Select T (trial operation) with Tempor Tempbutton and press Mode button for
3. Press On/Off button to turn on the system.
208
in heating operation, select the highest programmable temperature.
functions and parts, such as the movement of the louvers, are working properly.
• To protect the air conditioner, restart operation is disabled for 3 minutes after the system has
been turned off.
28°C) in cooling operation, 68°F to 75°F (20°C to 24°C) in heating operation).
confirmation.
 Trial operation will stop automatically after about 30 minutes.
To quit trial operation, press On/Off button.
 Some of the functions cannot be used in the trial operation mode.
1, 2
SiUS092230EA
2
1, 2
3
Part 7 Trial Operation and Field Settings
R7000370

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents