M.2 Solid-State Drive; Removing The M.2 2280 Solid-State Drive - Dell P138G Service Manual

Table 3. Antenna-cable color scheme
Connectors on the
wireless card
Main
Auxiliary
3. Align and place the WWAN-card bracket on the WWAN card, and tighten the (M2x3) screw.
Next steps
1. Install the base cover.
2. Follow the procedure in

M.2 solid-state drive

Removing the M.2 2280 solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
NOTE: This procedure applies only to computers shipped with a M.2 2280 solid-state drive installed.
NOTE: The M.2 card installed on your computer depends on the configuration ordered. Supported card configurations on
the M.2 card slot:
● M.2 2230 solid-state drive
● M.2 2280 solid-state drive
The following images indicate the location of the M.2 2280 solid-state drive and provide a visual representation of the removal
procedure.
Antenna-cable color
White
Black
after working inside your
before working inside your
Silkscreen marking
MAIN
AUX
computer.
computer.
△ (white triangle)
▲ (black triangle)
Removing and installing components 37