Installing The Sim Card Slot Filler; Palm-Rest Assembly; Removing The Palm-Rest - Dell P138G Service Manual
Hide thumbs
Also See for P138G:
- Service manual (139 pages) ,
- Setup and specifications manual (30 pages) ,
- Re-imaging manual (18 pages)
Table of Contents
Advertisement
2. Lift the SIM card slot filler out of the system.
Installing the SIM card slot filler
Prerequisites
If you are replacing a component, remove the necessary component before the installation procedure.
About this task
The following image provides a visual representation of the SIM card slot filler installation procedure.
Steps
1. Place the SIM card slot filler into its compartment on the palm rest ensuring that the SIM card slot filler is aligned with the
ribs on the palm rest.
2. Press the SIM card slot filler until you hear it click ensuring it fits securely into the SIM card slot filler.
Next steps
Follow the procedure in
after working inside your
Palm-rest assembly
Removing the palm-rest
Prerequisites
NOTE:
For models with smart card reader configuration, the smart card reader is preinstalled in the replacement palm-rest
assembly.
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
SIM
card.
computer.
before working inside your
card.
computer.
Removing and installing components
113
Advertisement
Table of Contents
