Speakers; Removing The Speakers - Dell P138G Service Manual

NOTE: The M.2 card installed on your computer depends on the configuration ordered. Supported card configurations on
the M.2 card slot:
● M.2 2230 solid-state drive
● M.2 2280 solid-state drive
The following image indicates the location of the solid-state drive and provides a visual representation of the installation
procedure of M.2 2230 SSD.
Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card slot.
2. Slide the solid-state drive into the M.2 card slot on the system board.
3. Slide the solid-state drive holder over the hook and press it down.
4. Align the solid-state drive thermal plate and firmly press to cover the solid-state drive.
5. Replace the two (M2x2.5) screws that secure the solid-state drive thermal plate to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Speakers

Removing the speakers

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 3-cell battery
42 Removing and installing components
after working inside your
before working inside your
or 4-cell battery.
computer.
computer.