Lan Interface (Continued) - D-Link DSL-124 User Manual

Section 4 - Configuration
MAC ADDRESS CONTROL SETTINGS
MAC Address
Select the LAN interfaces to apply the MAC address control to. The
Control: options are LAN1, LAN2, LAN3, LAN4, and WLAN.
Add your client device MAC addresses below, then select the interfaces to apply MAC
Address Control to, and click Apply Changes.
Enter the MAC address of your client devices and click Add.
New MAC
Address:
CURRENT ALLOWED MAC ADDRESS TABLE
This list displays the currently allowed devices, listed by their MAC address. If you wish to
remove a device, click the Delete button. Take care when removing devices so you don't
accidentally block your configuring device.
D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual

LAN Interface (Continued)

26