D-Link DSL-124 User Manual page 50
Wireless n300 adsl2+ modem router
Hide thumbs
Also See for DSL-124:
- Quick installation manual (8 pages) ,
- User manual (2 pages) ,
- Modem configuration manual (2 pages)
Table of Contents
Advertisement
Section 4 - Configuration
Local IP Address:
Enter your local IP address.
Netmask:
Enter your subnet mask.
Remote IP
Enter your default gateway.
Address:
This defaults to Auto.
Default Route:
Unnumbered:
This option is unavailable.
Configure the IPv6 WAN settings. If the IP Protocol is set to IPv4,
IPv6 WAN
Settings:
these settings are unavailable.
Select either Slaac or Static.
Address Mode:
IPv6 Address:
Enter your IPv6 Static Address. Only available in Static mode.
IPv6 Gateway:
Enter your IPv6 Gateway. Only available in Static mode.
DHCPv6 Mode:
Select either Auto, Enable, or Disable.
Request DHCPv6
Check this box to enable. Only available if DHCPv6 Mode is set to
Address:
Enable or Auto:
Request DHCPv6
Check this box to enable. Only available if DHCPv6 Mode is set to
PD:
Enable.
Note: If you need to manually specify PPPoA authentication methods, you must first
create the connection, and then modify it by selecting the pencil icon from the WAN
Table. See page 47.
Click Add to create your connection.
D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
IPoA Mode (continued)
45
Advertisement
Table of Contents
