D-Link DSL-124 User Manual page 72

Section 4 - Configuration
The following settings are available if Direction Select is set to WAN:
Select either Interface or Address.
WAN Setting:
The following settings are available if WAN Setting is set to Interface:
WAN Interface:
Select the WAN interface to apply the ACLv6 rule to.
Services Allowed: Select the services to allow.
The following settings are available if WAN Setting is set to IP Address:
IP Address: Enter the IPv6 IP address and prefix.
Services Allowed: Select the services to allow.
Click Add to add the ACLv6 rule.
CURRENT IPV6 ACL TABLE
This table displays the IPv6 ACL rules. To delete a rule, click Delete.
D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
Access Control List IPv6 (continued)
ACLV6 SETTINGS
67