Section 4 - Configuration
This page allows you to enable or disable various services from being used on the LAN or
WAN side using IPv6 parameters.
ACLV6 CONFIGURATION -- DIRECTION
Direction Select:
Choose either LAN or WAN.
The following settings are available if Direction Select is set to LAN:
LAN ACL SWITCH CONFIGURATION
Choose either Enable or Disable.
LAN ACL Switch:
IP Address:
Enter the IPv6 IP address and prefix.
Services Allowed:
Un-check Any to individually select the services which will be
available on your LAN.
Click Add to add the ACLv6 rule.
D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
Access Control List IPv6
ACLV6 SETTINGS
66