Wireless Advanced - D-Link DSL-124 User Manual

Section 4 - Configuration
This section allows for advanced configuration of wireless settings.
ADVANCED WIRELESS SETTINGS
Authentication Select the type of authentication, either Open System, Shared Key,
Type: or Auto. Open System is not recommended.
Fragmentation 2346 is the default and recommended setting. Packets exceeding
Threshold:
this threshold, in bytes, are fragmented before transmission.
Advanced users may wish to adjust this value to improve
performance in the presence of radio frequency (RF) interference.
RTS 2347 is the default and recommended setting. Advanced users
Threshold:
may wish to make minor adjustments if data flow problems exist.
Beacon 100 is the default and recommended setting. Specify a value for
Interval: the beacon interval. Beacons are packets sent to synchronize a
wireless network.
DTIM 1 is the default and recommended setting. Delivery traffic indication
Interval:
messages inform wireless clients of how often to listen for buffered
multicast or broadcast data.
Data Rate: Select the data rate from the drop down menu. Be careful when
selecting speeds as your legacy devices may not support higher
speeds or bandwidths. The default and recommended setting is Auto.
Preamble Type: Use the drop-down menu to specify whether the router should use
the Short Preamble or Long Preamble type. The preamble type
defines the length of the CRC (Cyclic Redundancy Check) block for
communication between the router and roaming wireless adapters.
D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual

Wireless Advanced

59