Wireless Basics - D-Link DSL-124 User Manual
Wireless n300 adsl2+ modem router
Hide thumbs
Also See for DSL-124:
- Quick installation manual (8 pages) ,
- User manual (2 pages) ,
- Modem configuration manual (2 pages)
Table of Contents
Advertisement
Section 4 - Configuration
This page allows you to manually configure the router's wireless connectivity settings. To
change your wireless network security settings refer to Wireless Security on page 52.
WIRELESS NETWORK SETTINGS
Disable Wireless
Check this box to disable the Wireless functionality of this device.
LAN Interface:
Band:
Select the wireless standards to use on your wireless network. The
options are 2.4 GHz (B), 2.4 GHz (G), 2.4 GHz (B+G), 2.4 GHz (N),
2.4 GHz (N+G), or 2.4 GHz (N+G+B).
Mode:
The DSL-124 operates in AP mode by default.
SSID:
Enter a unique Network Name (SSID) to identify your network.
Channel Number:
Select the channel number for your wireless network to operate
on. Choose 1-13, or Auto. The default is Auto.
Radio Power
Choose the wireless transmission power strength. The options are
(Percent):
100%, 60%, or 20%. The default is 100%.
Associated
Click this button to see a list of the currently connected wireless
Clients:
clients.
Channel Width:
Choose the transmission channel bandwidth. The options are 20
MHz or 20/40 MHz.
Control Sideband:
Configure Upper or Lower sideband use for 40 MHz connections.
Click Apply Changes to have your changes take effect.
D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
Wireless Basics
51
Advertisement
Table of Contents
