Setting Your Cleaning Schedule On The Remote - Shark ION ROBOT RV700 Series Instructions Manual

USING YOUR SHARK ION ROBOT™ - continued
TIP: Whenever you use
the remote control, make
sure you point it directly at
Shark ION ROBOT, and
ensure that Shark ION
ROBOT is powered on.
13
1-800-798-7398
Dock Spot
Clean
Enter

SETTING YOUR CLEANING SCHEDULE ON THE REMOTE

1
To schedule a cleaning, the day and time must be set.
If you haven't yet set the date and time, follow the steps
on page 12.
2 To schedule or edit a cleaning, press and hold the
SCHEDULE button (with the calendar icon) on the remote
control for one second. On the screen, the day of the week
display will flash.
3 Use the UP/DOWN arrows on the remote to select the
day of the week for your scheduled cleaning. (Days with a
cleaning already scheduled will be circled. If a day is not
circled, there is no cleaning scheduled for that day yet.)
Press the CLEAN/ENTER button on the remote to set
the day. The day of the week will remain flashing until the
cleaning time is completely scheduled.
4 Use the UP/DOWN arrows on the remote to turn ON or
OFF the cleaning scheduled for the selected day. Press
CONFIRM/CLEAN to confirm selection.
5 If OFF is selected, the screen will display the days of the
week again, with no time or AM/PM options. If ON is
selected, a circle will appear around the selected day. To
change the time of the cleaning on the selected day, use
the UP/DOWN arrows on the remote to select the hour of
the cleaning, then press CLEAN/ENTER to set.
6 On the screen, the minutes field in the time display will
begin flashing. Use the UP/DOWN arrows to select the
minutes, then press the CLEAN/ENTER button to set. On
the screen, AM and PM will begin to flash.