Table of Contents
Advertisement
TIPS AND TRICKS FOR GREAT PERFORMANCE
Your Shark ION ROBOT™ is designed with Smart Sensor technology so it can
clean all areas of your floors and navigate its way out of tight spaces. During your
first few cleanings, you may need to make some small adjustments to optimize
your robot's performance.
CORDS AND OBSTRUCTIONS
Always prep your home before cleaning.
Some furniture or loose cords may create
problems for your robot. Clear away cords
and obstructions or block off the area with
the included BotBoundary™ strips.
LOW-CLEARANCE FURNITURE
Your robot may find its way under furniture
with low clearance, but not be able to free itself.
Use furniture risers to increase clearance, or
create a no-go zone with the included
BotBoundary strips.
DOORWAY THRESHOLDS
Your robot can easily climb over most common
thresholds. However in some situations they
may present a challenge. Use the included
BotBoundary strips to block off these areas.
RETURNING TO DOCK
Make sure the dock is set up as shown.
If your robot roams too far, it could have
trouble finding the dock. It may be helpful to
block off part of your home with the included
BotBoundary strips, or to add a second dock
(available at sharkaccessories.com)
Tip: You can use the included connectors to create angles with your
included BotBoundary strips.
23
1-800-798-7398
Before Prep
Robot Friendly
3 ft.
5 ft.
3 ft.
Advertisement
Table of Contents
