Table of Contents
Advertisement
PREPPING YOUR HOME USING BOTBOUNDARY
Use the BotBoundary strips to quickly and easily create "no-go zones" to keep
your robot out of the areas you would like it to avoid. These may include:
• Near power cords that might cause tangles
• Hallways where you'd rather your robot not travel
• Around furniture with low clearance that may trap your robot
USAGE INSTRUCTIONS
1. Cut the BotBoundary strip to the desired length, 18" Minimum,
so it covers the entire perimeter of an object or spans the length
of the doorway you'd rather your robot not cross.
2. Simply lay the BotBoundary strip flat on the floor or under an
area rug. For best results, make sure your BotBoundary strip is
completely flat against the floor.
3. With the provided connectors, you can create angles to
customize the BotBoundary strips to fit your home.
When setting up your BotBoundary strips it is useful to either make a
closed loop around an object using the included connectors or to place
them between fixed objects, like door frames or legs of a couch.
BotBoundary strips
BotBoundary strips
STRIPS
™
(18" Minimum)
Boundary strip lays flat
s h a r kc l e a n . c o m
24
Advertisement
Table of Contents
