Using Your Shark Ion Robot; Using The Remote Control (Select Models); Setting The Day Of The Week And Time On The Remote Control - Shark ION ROBOT RV700 Series Instructions Manual

USING YOUR SHARK ION ROBOT™

USING THE REMOTE CONTROL
(SELECT MODELS)
The remote control requires 2 AAA batteries.
Install batteries into remote before using.
With the remote control, you can start and
stop Shark ION ROBOT, select Spot Cleaning
mode, send the unit back to the charging
dock, and program a cleaning schedule for
your robot.
2
4
5
A
Dock
C
E
1 Signaling Icon
2 Time Icon
3
Schedule Icon
4 Days Of The Week
(Mon–Sun)
5 Scheduling (On/Off)
6 Time
Dock Spot
Clean
Enter
1
3
6
B
Spot
Clean
D
Enter
F
A Dock Button
B Spot Clean Button
C
Up/Down Arrows
D Confirm/Clean Button
E Time Button
F Schedule Button
Dock
SETTING THE DAY OF THE WEEK AND
TIME ON THE REMOTE CONTROL
1
Press and hold the TIME button (with the
clock icon) on the remote for one second.
On the screen, the day of the week display
will begin flashing.
2 Press the UP/DOWN arrows on the
remote control to select the day of the
week, then press the CLEAN/ENTER
button (the center button with the arrow)
to set. On the screen, the hour field in the
time display will begin flashing.
3 Use the UP/DOWN arrows on the remote
control to select the hours, then press the
CLEAN/ENTER button to set. On the
screen, the minutes field in the time display
will begin flashing.
4 Use the UP/DOWN arrows to select the
minutes, then press the CLEAN/ENTER
button to set. On the screen, AM and PM
will begin to flash.
5 Use the UP/DOWN arrows to select
AM or PM, then press the CLEAN/ENTER
button to set.
6 Once you have finished setting the time,
you can proceed to setting a cleaning
schedule.
Spot
Clean
Enter
s h a r kc l e a n . c o m
12