Table of Contents
Advertisement
Available languages
Available languages
Flex Zone
•
This area can be used as a single zone or as two different zones, accordingly to
the cooking needs anytime.
•
Flexible area is made of two independent inductors that can be controlled
separately.
•
Important: Make sure to place the cookwares centered on the single cooking
zone. In case of big pot, oval, rectangular and elongated pans make sure to place
the pans centered on the cooking zone covering both cross.
Examples for good and bad pot placements:
As big zone
1.
Touch the slider of the heating zone (left side) that you wish to go into
flexizone, then touch the flex zone selection button to activate the flexible
area as a single big zone, the indicator next key will be on.
2.
Touch the slide along the "—" control, or just touch any point of the "—" to
adjust the power level.
As two independent zones
1. If you want to cancel the flex zone, touch the slider of the heating zone again,
then touch the flex zone selection button, the indicator next to the flex zone
EN-17
button will disappear.
Locking
the
Controls
•
You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Touch the keylock control. The timer indicator will show " Lo ".
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the keylock control for 3 seconds
3.
You can now start using your Induction hob.
When the hob is in the lock mode, all the controls are disable except the ON/OFF
you can always turn the induction hob off with the ON/OFF control in an emergency,
but you shall unlock the hob first in the next operation.
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the Induction
hob. When an excessive temperature is monitored, the Induction hob will stop
operation automatically.
Over-spillage Protection
Over-spillage protection is a safety protection function. It switch off the hob
automatically within 10s if the water flow to the control panel, while buzzer will
beep 1 second.
Detection of Small Articles
When an unsuitable size or non
-
magnetic pan (e.g. aluminium), or some other
small
item
(e.g.
knife,
fork,
key)
has
go
on
to
standby
in
1
minute.
The
fan
a further 1 minute.
Auto Shutdown Protection
Auto
shut
down
is
a
safety
protection
automatically
if
ever
you
forget
to
on).
been
left
on
the
hob,
the
hob
automatically
will
keep
cooking
down
the
induction
function
for
your
induction
hob.
turn
off
your
cooking.
The
default
working
EN
-
18
,
hob
for
It
shut
down
times
Advertisement
Table of Contents
