Toshiba HWT-602S21SM3W-E(TR) Service Manual page 293

REPLACEMENT OF SERVICE PC BOARD
Don't open the inverter cover before 1 minute after power has been turned off because an electric shock may be occurred.
Don't open the inverter cover before 1 minute after power has been turned off because an electric shock may be occurred.
Setting the jumper wires
Setting the jumper wires
Part name
Part name
Jumper J800～
Jumper wire J800~J801
wire J801
Since this service PC board is available for several models, cut the jumper wires according to the
Since this service PC board is available for several models, cut the jumper wires according to the
following table.
following table.
If they are not cut correctly, a certain error code appears on the remote controller and the unit
If they are not cut correctly, a certain error code appears on the remote controller and the unit not
not operate.
operate.
Factory setting (default)
Factory setting (default)
HWT-801HW*, HWT-801HRW*
HWT-801HW*, HWT-801HRW*
HWT-1101HW*, HWT-1101HRW*
HWT-1101HW*, HWT-1101HRW*
*: Characters indicate the country code(-E),(-TR) and etc.
*: Characters indicate the country code(-E),(-TR) and etc.
P.C.Board (MCC-1675)
Replacement Procedure Manual
! WARNING
Function
Function
Model switching
Model switching
Model name
Model name
P.C.Board Replacement Procedure Manual
PC board Replacement Procedure Manual
WARNING
Cut these jumper wires according to the following
Cut these jumper wires according to the
table.
following table.
292
43P-69-006
Setting
Setting
J 800 J 801
J 800 J 801
○ ○
O O
× ○
× O
○ ×
O ×
○:Connected
O
: Connected
×:Cut
×
: Cut
2E30098001