Toshiba HWT-602S21SM3W-E(TR) Service Manual page 287

❐3 Setting of the setup data to the memory
3 Setting of the setup data to the memory
The default setup data are stored in the memory of the service main PC board.
The default setup data are stored in the memory of the service main PC board.
1. Press the [ ] button and the [
1. Press the [ ] button and the [
"FIELD SETTING MENU" will be displayed on the top of the screen.
"FIELD SETTING MENU" will be displayed on the top of the screen.
2. Press the [ ] / [
2. Press the [ ] / [
"FIELD SETTING MENU" screen, then press the [
"FIELD SETTING MENU" screen, then press the [
3. Press the [ ] / [ ] button to select DN code or Data, then press
3. Press the [ ] / [ ] button to select DN code or Data, then press
the [ ] / [ ] button to change the value.
the [ ] / [ ] button to change the value.
Press the [ ] button. The set value is registered.
Press the [ ] button. The set value is registered.
*First, make the initial settings as shown in the table below.
*First, make the initial settings as shown in the table below.
DN Item
DN Item
Type setting
Type setting
10
10
Water heat exchanger capacity
Water heat exchanger capacity (Hydro
unit type setting)
(Hydro unit type setting)
11
11
6B8 Hot w ater supply is using
6B8 Hot water supply is using
ZONE2 operation is using
ZONE2 operation is using
6BA
6BA
Back up heater capacity
Back up heater capacity
6BC
6BC
Outdoor unit type setting
Outdoor unit type setting
6BD
6BD
Pump P1 ON/OFF cycling (During long
periods of system OFF)
Pump P1 ON/OFF cycling (During long
6D1
6D1
periods of system OFF)
] button at same time for at least 4 sec.
] button at same time for at least 4 sec.
] button to select "Hydro Unit DN" on the
] button to select "Hydro Unit DN" on the
0070: Wall mounted type
0070: Wall mounted type
0071: All In One type
0071: All In One type
0010: 60
0010: 60
0017:140
0017:140
0000: Yes
0000: Yes
0000: No
0000: No
0000: 3 kW
0000: 3 kW
0002: 9 kW
0002: 9 kW
0000: 401 / 601
0000: 401 / 601
0002 - 0003: None
0002 - 0003: None
0000: OFF
0000: OFF
] button.
] button.
Details
Details
Wall Mouned type
0070: Wall mounted
0070: Wall mounted
type
type
0015: 110 Depend on type
0015: 110 Depend on type
Check the model name of Hydro unit and set
※Check the model name of Hydro unit and set
the correct data.
the correct data.
0001: No 0000: Yes
0001: No 0000: Yes
0001: Yes 0000: No
0001: Yes 0000: No
0001: 6kW Depend on type
0001: 6kW Depend on type
Check the model name of Hydro unit and set
※Check the model name of Hydro unit and set
the correct data.
the correct data.
0001: 801 / 1101/1401 Depend on Outdoor unit type
0001: 801 / 1101/1401 Depend on Outdoor unit type
Check the model name of Outdoor unit and
※Check the model name of Outdoor unit and
set the correct data.
set the correct data.
0000: OFF (Until Mar-2023)
0001: ON 0000: OFF (Until Mar-2023)
0001: ON (From April-2023)
0001: ON (From April-2023)
0001: ON
Set DN[6D1] to "0001" to privent pump lock
※Set DN[6D1] to "0001" to privent pump lock
4
286
FIELD SETTING MENU(2/2)
Service monitor
Hydro Unit DN
Remote controller DN
Reset power consumption data
Sensor information
Hydro Unit DN
Code
(DN)
remarks
remarks
All In One type 2 series
Wall Mouned type
All In One type 2 series
0071: All In One type
0071: All In One type
Depend on type
Depend on type
Check the model
※Check the model
name of Hydro unit
name of Hydro unit
and set the correct
and set the correct
data.
data.
SET
Data
2E30099003